- Prepare and prime the surface as you would any normal paint job. OK to spray over fresh urethane paint job.

- Mix 1 part blender to 1 part urethane reducer.

- Mix desired candy or powder into blend.

- Adjust air pressure to 35-45 psi for gravity or siphon spray guns, or 5-6 psi at the cap for HVLP.

- Apply 1-2 light to medium coats onto the blend area, extending each coat a bit further each time. Allow 5-10 minutes between paint coats.

Dry times at 70F: Dust free in 10 minutes; Tack free in 15 minutes; tape free in 45 minutes.